730 West Cheyenne Ave. Suite #120 N. Las Vegas NV, 89030

(702) 395-7005 info@thermalrelief.com

Drawmer Service

Most Drawmer repairs typically involve maintence/replacement. The age of the unit is one of the major factors determining the cost of the repair. The older the unit, the more parts needed to be replaced.

In most cases the pots and switches are the main culprits. We have found that cleaning them is only a short term fix. Replacing them will provide the only long term solution.

The tube units will on ocassion need to be re-tubed depending on how long you leave them on. Turning the unit off between sessions wilI extend tube life. While the cost of the tubes is fairly inexpensive, about $20/tube; you must calibrate them when any tube is replaced, which is fairly labor intensive.

As in all repairs we do we will only do a complete repair, returning the unit to its original factory specifications. If you do not want your unit repaired to the original factory specs, we are more than willing to sell you what ever parts YOU feel it needs and YOU can install them yourself.

WARNING!!! ~ VACUUM TUBE EQUIPMENT CONTAIN LETHAL VOLTAGES !!! PROCEED AT YOUR OWN RISK !!!

Listed below are some average repair costs for most of the Drawmer units. (all prices include tubes, parts, & labor but NOT shipping) These are NOT flat rates, but average repair costs based on units that we have repaired in the past. Your actual repair cost may be above or below these average costs.

60’s Series »
1960 – version 1, 2 ~ average repair cost ~ $583.00
1960 – version 3, 4 ~ average repair cost ~ $495.00
1961 – version 1 ~ average repair cost ~ $731.50
1961 – version 2 ~ average repair cost ~ $539.00
1962 ~ average repair cost ~ $555.50
1968 ~ average repair cost ~ $319.00
1969 ~ average repair cost ~ $407.00

Pro Series »
DS201 – version 1 ~ average repair cost ~ $335.50
DS201 – version 2 ~ average repair cost ~ $264.00
DS404 ~ average repair cost ~ $308.00
DS501 ~ average repair cost ~ $308.00
DL241 ~ average repair cost ~ $308.00
DL251 ~ average repair cost ~ $308.00
DL441 ~ average repair cost ~ $308.00
DF330 ~ average repair cost ~ $308.00
DA6 ~ average repair cost ~ $390.50
LA12 ~ average repair cost ~ TBD (see below)

MX Series »
MX30 ~ average repair cost ~ $225.50
MX40 ~ average repair cost ~ $225.50
MX50 ~ average repair cost ~ $225.50
MX60 ~ average repair cost ~ $308.00

Masterflow Series »

DC2476 – We no longer repair these – ship to UK for repair
DC2496 – We no longer repair these – ship to UK for repair

Tubestation »
TS1 ~ average repair cost ~ $247.50
TS2 ~ average repair cost ~ $247.50

Other Drawmer Products »

M-Clock ~ average repair cost ~ $225.00
Six-Pack ~ average repair cost ~ $500.50
SP2120 ~ average repair cost ~ TBD (see below)

TBD – (To Be Determined) – We have not repaired one yet, so we can’t estimate